home inspection myrtle beach, whiteville home inspector, south port house inspector, supply house inspection, north carolina building inspector, nc real estate inspection, loris, conway, surfside, pawleys, murrells, south carolina
Company Direct #: 910-579-0023
Fax: 910-579-1514
Email: secureinspec@gmail.com
    
Arrow_Nav Home
Arrow_Nav Our Staff
Arrow_Nav Request An Inspection
Arrow_Nav Fees
Arrow_Nav Testimonials
Arrow_Nav Smart Air Environmental
Arrow_Nav Appliance/System Recall
Arrow_Nav Home Inspection Survey Covers
Arrow_Nav NC Standards of Practice
Arrow_Nav Slide Show
Arrow_Nav Home Manual
Arrow_Nav FAQs
Arrow_Nav Mortgage Calculator
Arrow_Nav Contact Us
GrandStrand Golf Association

Recall Chek

Residental Warranty Services, Inc.
 
Secure Inspect Secure Inspect

EIFS - Exterior Insulation and Finishing Systems

What are EIFS?

Exterior Insulation and Finish Systems (EIFS) are multi-layered exterior wall systems that are used on both commercial buildings and homes. EIFS were introduced in the U.S. almost 30 years ago and were first used on commercial buildings and then later on homes. EIFS typically consist of an insulation board make of polystyrene foam (which is secured to the exterior wall surface with an adhesive and/or mechanical attachments), a water-resistant base coat applied on top of the insulation and reinforced with fiberglass mesh, and a finish coat typically using acrylic co-polymer technology. This type of system is often referred to as artificial stucco.

The Potential Problem with EIFS...

The potential problem with EIFS is that moisture can get trapped behind the highly water resistant material with no way out. This can cause the framing to rot and foster the growth of mold between the exterior and interior walls. Damp and rotting wood is also a prime target for subterranean termites. It should be stated that the potential for these conditions exist with any type of exterior siding product be it brick veneer, wood, or vinyl siding. The potential for this condition with EIFS however can be exacerbated by its superior water resistance. Once moisture gets in, regardless of its origin, it usually has no escape.

The main locations where water tends to infiltrate into the framing structure of a building using an EIFS is around doors and windows, where the roof connects to the EIFS (roof flashing), and below extended exterior deck connections. Also, any moisture from within the home trying to find a path out will likely be thwarted by the EIFS.

The EIFS industry has been plagued by class action, and individual lawsuits (particularly in humid climates). The public's confidence in the products have been shaken to say the least. The lawsuits contend that the problem is with the nature of the product and the manufacturers contend that sloppy installation and poor maintenance are the culprits.

Regardless of who is "right", its clear that homes with EIFS require special scrutiny during inspection.

Secure Inspect

Custom Website Design by Active Web Group